The service life and service life of bus shelters should be another major concern for consumers. The bus station manufacturer will explain the key links that affect the service life of the bus shelter from the following points:

1、 Integrated manufacturing frame structure of bus stop

Although the difference in materials used is another reason that affects the service life of bus stop signs, the welding process is another key link at the manufacturing level. Welding, also known as fusion and melting, is a manufacturing process that makes metal materials closely connected by heating, high temperature, or ultra-high pressure. Welding technology is the basis for manufacturing bus stops. Strictly regulate all manufacturing processes, and no small welding point can be ignored!

2、 Product surface treatment processing technology

The surface treatment process of the shelter revolves around many manufacturing processes, such as electrostatic spraying, electric welding, etc. During the storage, production, processing, logistics, and transportation of product parts, the surface will contain rusty iron, air oxide skin, welding bumps, ash, sand or oil, and other wastes. If the coating is closely attached to the surface of the shelter, the surface treatment of the product workpiece should be strengthened before coating, otherwise, the corrosion resistance of the product in the middle and later stages will be affected.

3、 Use of raw materials

There are many kinds of raw materials used for the production of bus stops and waiting booths, but the core materials are stainless steel and galvanized sheets. Stainless steel is characterized by stability, high safety, and durability, which can effectively improve the service life of products. However, as far as the overall design style and modeling design of bus stops are concerned, this material is inferior to galvanized sheet material in highlighting the artistic features and personality characteristics of the waiting booth. Galvanized sheet is coated with zinc on the surface of a thick steel plate. Hot dip galvanizing is a commonly used economic and effective anti-corrosion method. It is favorable for production and processing, with high-cost performance and good process performance.

4、 Maintenance and cleaning in the middle and later period

Like all vehicles, bus stops should be maintained every day and cleaned on time. For parts with frequent major problems, they shall be rectified and repaired in a targeted manner to extend the service life of the product.

If the above points are strengthened, the service life of bus shelters will be further extended, and the 10-year service life is not a problem.