GROUP NEWS
Bus shelter manufacturer: bus stop installation precautions
Release date : 05 Aug 2022

The bus stop is a public facility specially built for the citizens waiting for the bus. It provides a place for people to wait for the bus and provides convenience for the public bus shelter. How is a bus stop erected? Today, the bus shelter manufacturer said that there are several points for the correct installation of the bus station!

1. The bus station meets the needs of travelers. As a public facility, bus stops not only meet the normal needs of parking and waiting, but also consider the convenience of special groups such as the elderly, the weak, the sick, the disabled, and children. It is necessary to configure high and low seats on the bus platform, and there must be auxiliary facilities for the roadbed and platform to facilitate wheelchairs getting on and off.

2. Dislocation setting of the upper and lower bus platforms

The halfway station should be located as far as possible at the main passenger flow distribution points along the way of the public transport line. When setting stops on the road section, the stations with symmetrical up and down should be staggered on the road plane, that is, the stations should be set up at forks. The staggering distance is not less than 50m. On the main road, the width of the express lane is greater than or equal to 22m, and it is not necessary to drive. When setting up a halfway station near an intersection, it is generally located 50m away from the intersection. On the main road with many vehicles in big cities, it should be located at a distance of 100m.

bus stop

3. The most suitable space for bus stops

Bus platforms are required to have functions such as sun protection, rain protection, lightning protection, and wind resistance. Therefore, setting up a wide rain-proof shed is a necessary part of the bus platform, but care should be taken not to cause too much impact on passing pedestrians during the design. According to relevant regulations, in principle, the width of the sidewalk for setting up the bus shelter should be more than 3m, and the width of the rain shelter is specified to be less than 2m (the sidewalk with a width of more than 5m can be equipped with a rain shelter of more than 2m wide).

The installation of bus stops needs to pay attention to the above points. Yilong has been deeply involved in the industry for 22 years and has rich project experience. If you have any needs, please contact us for consultation.