The bus stop is a common bus supporting travel facility. Its main function is to provide a waiting place for people to travel. So what processes do bus shelter manufacturers have when making the platform?

The bus stop has different components, which leads to different production processes. Then, according to each component, different production processes will be introduced separately.

1. The production process of the bus stop lightbox

The bus stop lightbox is generally formed of the galvanized sheet by cutting, bending, and welding. The surface is sprayed at a high temperature to form advertising light boxes of different colors. To prevent rainwater from entering, waterproof sealing strips are used around it. Because it is a sealed environment, it will cause internal heat. Built-in cooling device. The window of the light box is made of tempered glass, which plays the role of beauty and protection.

2. The production process of the bus platform column

Generally, before ordering a bus station, the diameter (circle) or length and width (square) of the column will be determined in advance, and then the finished product will be purchased directly from the manufacturer according to the requirements, and the column will be produced with different colors and shapes after the surface treatment. The high-temperature spray is generally used.

3. The production process of the bus platform ceiling

When making the ceiling, the stress point and bearing point of the ceiling should be fully considered, and then the middle part of the keel should be welded. Generally, the thickness of the keel is determined according to the bearing capacity of the ceiling. 

The basic production process of the bus stop has the above points. Combined with more functions, more modern intelligent equipment will be used to enhance the experience of the bus shelter.