The bus shelter needs to be used outdoors for a long time and is a large item. In order to facilitate on-site installation and transportation, the bus shelter has been simply assembled before leaving the factory, and only needs to be assembled on site. This method greatly reduces the workload of on-site construction, saves costs, and facilitates transportation. However, this has high requirements on the production of the bus shelter, and the components of the bus shelter must be matched, so YEROO will do the final factory inspection before leaving the factory - trial installation, so that problems can be found and rectified in time before leaving the factory. .

Do you know what to install and check? Let me take you to know:

1. Structural inspection

In the production of the bus shelter, the bus shelter can generally be divided into several components: the ceiling, the column, the advertising light box, the bench, and the guardrail. The biggest advantage of the assembled bus shelter is that it becomes large and small, and it is convenient to transport. In the trial installation, check whether the parts of the shelter are complete and whether the structure is firm.

2. Parts inspection

The parts are assembled on a simple fixture or an assembly table; during assembly, the overall dimensions, installation dimensions and key dimensions should be measured against the drawings at any time. After the installation is completed, the installation holes and splicing plates need to be processed. The position of the splicing board and the splicing board should meet the requirements of the drawing to ensure that the bus shelter can be installed smoothly when it arrives at the site.

3. Smart accessories detection

As a professional manufacturer, YEROO's products are of course indispensable for smart bus shelters. For the intelligent bus shelter, we need to do these tests before leaving the factory, check whether the line connection is correct, whether there is a conflict between the device and the serial port resources, and check whether each intelligent module can operate normally. Each intelligent module can be shipped from the factory only after the trial operation is normal.

4. Process self-inspection

The process self-inspection is our last out-of-the-box inspection of the bus shelter. Comparing the bus shelter pattern and process regulations, conduct self-inspection. After passing the inspection, it will be handed over to the full-time inspector for inspection. The full-time inspector can only leave the factory after the inspection is completed.

YEROO bus shelters never compete with low prices, and always insist on being responsible for customers and products. Taking "100% customer satisfaction" as its business tenet, it always adheres to innovation as the first, market and customer demand as the guide, and accepts customer inspections with ultra-high quality standards.