In recent years, with the development of urban public transportation, efforts have been made to create a civilized transportation model city. The bus shelter plays a very important role and responsibility in the promotion of the city's image. At the same time, it also provides a convenient, fast and comfortable waiting environment for citizens to travel. The bus shelter has a lot of professional common sense and design elements in the production process, which also leaves many customers with a sense of mystery. Next, let’s introduce the bus shelter. The technological process and key points in the production process.

First of all, we have to determine the customer's requirements, so that the design department can design the shelter according to the customer's ideas and actual conditions. After designing the renderings and floor plans, we must communicate with the customer and determine it and then hand it over to the engineer in charge of the workshop. Produce and process with technicians.

1. Determine the basic scale requirements of the shelter:

a. The size of the bus shelter: customizable;

b. The color of the shelter: can be customized;

c. Wind resistance: Level 12; Earthquake resistance: Level 8;

2. Make the light box layout:

a. The imported metal fluorocarbon paint spraying frame of the national standard cold plate is equipped with an integrated built-in car EPDM sealing rubber strip, combined with the layout water guiding system, waterproof and dustproof, and the anti-corrosion period is more than 10 years;

b. The imported metal fluorocarbon paint spraying inner frame of the national standard cold plate is completely processed in accordance with the national standard process. The surrounding water-conducting seal, the inner lining board, the installation of heat dissipation equipment, leakage maintenance and other electrical appliances;

c. The window is 6mm automotive-grade tempered float glass, silk-screened protective edge, and the anti-aging period is more than 20 years;

d. The light source of the box body is the LED side light source, with over-voltage, over-current, and reverse connection maintenance functions;

e. Built-in anti-theft lock, open and convenient;

f. National standard cold plate, full CNC shearing and bending, and CNC slotting of the bending line to prevent the bending and round corners from appearing. The door frame is made of crushing edge technology, and the window function is similar to flat, beautiful and elegant;

3. Column production department

The inner core of the column is made of high-strength cold-galvanized steel, sprayed with imported metal fluorocarbon paint, and processed in accordance with the national standard process. Connecting buried flanges and ground cages are made of high-strength 45# steel, with a planned wind resistance of 12 and earthquake resistance; the column is out of galvanized sheet, fully CNC bending and forming, and the bending is slotted to prevent bending and round corners. Presented; CNC bending machine has a special winding compensation function to ensure the straightness of the hemming.

4. The bus stop LED display

Integrated equipment bracket, assembled with full outdoor high-definition, high-brightness LED display module;

5. The production of waterproof ceiling department

a. Upper ceiling: anti-rust treatment with imported plastic powder spraying for national standard cold plate, spraying with imported metal fluorocarbon paint;

b. Lower ceiling: select outdoor special 4mm thick aluminum-plastic panels, aluminum layer thickness 0.5mm. Ceiling exterior layout: select high-strength galvanized square tubes, sprayed with imported metal fluorocarbon paint.

Finally, the construction of the embedded parts is determined according to the actual situation. The engineer conducts the final debugging of the electrical power rolling system. After passing it, it can be placed and shipped, and then the various components are assembled. A brand-new shelter is completed.