With the gradual rise of the outdoor advertising player market, more and more advertising player manufacturers have set their sights on the outdoor advertising player market, but unlike indoor LCD advertising players, the technical content of outdoor machines will be much higher, and the craftsmanship will be much higher. A little more complicated, after all, due to the different use environment, the design needs to consider the changes of the seasons and weather. In this regard, the design of the outdoor advertising player housing will be much more complicated. So what are the acceptance requirements of the outdoor advertising player shell? Next, YEROOTECH will introduce to you.
What are the acceptance requirements for outdoor advertising player shells:
1. First of all, it is the acceptance of the entire outdoor LCD advertising player's cabinet, because it is placed outdoors for flushing test. Generally, check whether the glass glue on the inner side of the welded shell is uniform, and whether it is dew on the outdoor welding. Watch the surface of the whole machine clean and check whether there is dust inside the glass. Touch the inside of the glass to see if it is compressed and flat. Use gravity to smooth it and see if there are blisters or bubbles. If there are, the touch is definitely not up to standard.
2. Check the mounting bracket, whether the nut is tightly adhered to the frame, and compare the mounting hole to be able to be fixed and placed. Compare with the outdoor advertising player cabinet, fix the nuts, and carefully check the gap between the screw holes and the glass glue. If there is separation or water ingress, you need to disassemble the holes immediately to make the waterproof glue firm.
3. Open the door frame of the outdoor LCD advertising player and try to close the door panel. If the door panel touches the pressure bar, the door frame cannot be closed with force, indicating that the design of the outdoor LCD advertising player door frame does not meet the anti-theft standard. It may be that the structure of the door panel is not good, or it may be a problem with the lock assembly.
4. Test the outdoor LCD advertising player with electricity. If the noise is loud and the internal sound insulation treatment effect is not obvious, first consider whether the internal structure design is reasonable.
The above content is an introduction to the acceptance requirements of the outdoor advertising player shell. As an outdoor advertising player is a combination of industrial and commercial equipment, customers need to consider its commercial value, and as an advertising player manufacturer, we need more It is to consider its product performance and durability. After all, the benefits are realized on the basis of the product. If there is no good product design and product performance, it is just a matter of paper.